Saturday, 15 September 2012

How to delete thumbs.db files in windows 7

If you windows user and if you are used hidden and super hidden files then you have a got many times on your image and movie files folder of thumbs.db.from which your pc is slow and you have to many type face problem. .

.There are following step below to remove thumbs.db
STEP:11.click the start bottom and find the control panel and in
search folder option, XP

2. select the "view" tab

3.and select the show hidden files and folder
and click "do not cache thumbnals"and click apply ok.


in windows vista and windows 7 user.
1.click the start bottom and find the control panel and in

2. select the view tab.

3.check the option "always show icons, never thumbnals"
and also select show hidden files and folder

Note: You do not need to do this option to disable thumbnails.
7. Now use “Disk Cleanup” to remove all of the thumbnails from the machine.
8.windows Explorer” type in the address bar “%LocalAppData%\Microsoft\Windows.
9. Right click on the “Explorer” folder and click “Properties”.
 In the folder’s properties window select the “Security” tab and click the “Advanced” button
.%LocalAppData%\Microsoft\Windows.
10. On the “Permissions” tab click
11. Uncheck the “Include inheritable permissions from the object’s parent”.
12. Click the “Remove” button in the windowssecurity box that pops-up.
13. On the “Permissions” tab click "the “OK” button.
14. Select “Yes” for the “Windows Security” pop-up  
windows and go back to “Folder Options” in the “Control Panel”.
15. Uncheck the “Always show icons, never thumbnails”.
STEP:2.1.Go to the start menu "run" and 
2.type gpedit:MSC and ok
3.after that in which open folder "Group policy Editor" 
4. Go to just left and side option.
5.select option Configuration/Administrative Template/windows
components/windows Explorer.
6.and long list open in which find option Turn-off caching of thumbnail pictures
on double click.
7.after that click Enable and Go to apply
8.click ok.
 

Best tricks How to SMPS power is working or not

The most common type o power supply use today internally in PCs is awitch mode power supply  (SMPS). An SMPS consists of high frequency switch, which is actually a transistor internally, with varying frequency ranging from 50 kHz to 1 MHz. this switch is used to control and stabilize the output voltage by switching the load current on and off. 

Identifying power supply Function
The power supply has a wide variety of function in your computer: some of the important function are listed below:
    1. -12 V is the power requirement of some the serial ports. however, it is not provided in new systems and rarely used in order system too. this voltage is provided by power supplies only for compatibility with the older hardware.

2. -5 V is the power requirement of floppy controllers in some of the earliest computer this voltage is provided by very limited Numbers of power supplies and that too for compatibility with the older hardware.

3.0 V: is the base voltage of the computer.this voltage is used as a reference against which other voltage are measured.

4. +3.3 is the power requirement of computer memory, most new processor, motherboard and some of the components on motherboard. This voltage is provided only by the new power supplies (in ATX and later from factors ).and is not available in older systems (in baby AT and earlier form factor).

5. +5 V: is the power requirement of computer memory, processor, motherboard and most of the other system components in the earlier computer systems (in baby AT and earlier).this voltage is also used for most of the motherboard components even in the newer systems (in ATX and later).

6. +12 V: is he power requirement of disk drives, fans and other types of cooling devices.

WIRE         VOLTAGE      FUNCTION
       
Black                 0                  Ground 
Blue                 -12                 Serial Data
Brown/Violet    +3.3               Sensor 
Gray                  +5                  Power good supply 
Green                +5                  Power supply on/off
Orange              +3.3               D Ram Refreshing
Purple               +5                  Stored by voltage 
White                -5                   Refreshing Ram 
Yellow              +12                Motor Rotation 
Red                  +5                   Logic circuit 

GREEN wire port and other in the BLACK. Switch ON the supply if the fan in the smps is working the smps is good.
  
.
         

How to open safe mode on my windows screen

If you encounter some problem in starting on windows normally, you can start the same in safe mode option. to use safe mode option:

1. Reboot your computer
2. Press F8 when the Boot menu is displayed .

The safe mode displays various menu option. some commonly used menu options of safe mode are:
  
   > safe mode option: starts the operating system with basic drivers and services.
  
   > safe mode with  networking: This option is similar to safe mode option, but also includes basic networking services.

  > safe mode with command Prompt : This option is similar to safe mode option, but the windows Explorer shell is not started.

safe mode starts minimal services that are listed under the registry key,
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Safemode.

You should use safe mode option if:
 
> An incompatible driver is installed

 > Windows Explorer Shell is corrupted
 
> An incompatible setting for the video card is made

How to transfer data phone memory to memory card on Nokia mobile




first of all select the option "menu" then device "option applicatiom" and select the option "galary"
chose the file which contain data which you need to treasfer and then "mark"the data and 
select the option name,it will show "select target folder "and the open your memory card and
open the device folder you want to send the data, and select the move to, hence data is moved.

How to remove bad sector on my windows 7 step by step

1. first of all, you open your windows "MY COMPUTER" and select the any drive like "c"
      
2. Go to "c:" drive propertied "TOOLS" option and "CHECK NOW" 
     
Go to "CHECK DISK OPTION" and select the two option and click "START"




Hope you enjoyed this.


How to create Dial-up connection on my windows 7 screenshot

To  configure a dial-up network connection in windows 7 ultimate, perform the following steps:


  1.       Click on the start-“CONTROL PANEL”  and then click “VIEW NETWORK  STATUS AND TASK”

FGo to "SET UP CONNECTION OR NETWORK"


Go to select "SET UP A DIAL-UP USING CONNECTION"

enter the "DIAL-UP PHONE NUMBER" and user name and this image show below:

TO create straight cable (cable 5) simple tricks





LABEL
COLOR CODE
PIN NUMBER
T2
WHITE/ORANGE
1
R2
ORANGE/WHITE
2
T3
WHITE/GREEN
3
R1
BLUE/WHITE
4
T1
WHITE/BLUE
5
R3
GREEN/WHITE
6
T4
WHITE/BROWN
7
R4
BROWN/WHITE
8
Connect an Ethernet port on a router to an Ethernet port
on a hub or switch .
if the router has an AUI port, connect one end to an
AUI transceiver before connecting to the router.